Town of Stratford - Procedures

Lighting Plan

Full Text from eCode360®

A lighting plan shall be required for any residential development greater than three units and commercial and industrial properties subject to these lighting standards. The lighting plan shall submit include the following:

A site plan indicating the location of all outdoor lighting fixtures.

A description of each lighting fixture. This description may include, but not be limited to, manufacturer's catalog cuts and drawings (including sections if requested), lamp types, lamp color ratings and lumen output ratings.

Photometric plans, prepared, stamped and signed by a licensed professional engineer qualified in outdoor lighting, depicting the location of all outdoor lighting fixtures and building-mounted lighting fixtures and a maximum ten-foot by ten-foot grid of both the initial and maintained lighting levels on the site, including any impact on adjacent properties.

A project lighting plan indicating how the lighting complies with the requirements set out in the Connecticut State Building Code for outdoor lighting, including the light pollution controls amendment to the International Building Code (Section 2703), and the 2021 International Energy Conservation Code rules on exterior lighting controls (C405.2.7);

The project lighting plan shall indicate how lighting has been coordinated with any associated landscaping plan to prevent site planning conflicts; and

Any other information the governing authority may determine is necessary to ensure that the proposed lighting complies with the provisions of these requirements.

6.7.7: Enforcement.

These regulations shall be enforced by the Zoning Enforcement Officer or Building Inspector empowered to inspect any exterior lighting and, for any violation of these Regulations, issue an order in writing for violations to be corrected or terminated.

This site is under construction. Got it!

MapLink™ | Procedures | Lighting Plan